+86-13489885214

How Do Imitation Porcelain Tableware Manufacturers Make Imitation Porcelain Tableware More Useful

May 24, 2022

1. Precautions


Do not use items with damaged or cracked edges.


Never start a fire in an ashtray or trash can.


Imitation porcelain tableware manufacturers feel that it is not necessary to place them in hot stainless steel plates or hot pots for heat preservation.


Imitation porcelain tableware manufacturers


Do not grill skewers with fire, or close to the stove.


Please avoid bumping or applying abrupt temperature changes in hot conditions to prevent cracking.


Do not apply strong impact to prevent cracking or damage.


2. Disinfection and storage


When using the disinfection and sterilization storage warehouse, please use the warm air storage warehouse, please set the storage location temperature to 80 ~ 85 ℃, 20 ~ 30 minutes after rising and falling.


Especially around the warm air blowing out of the entrance, it will become very high temperature, a warm reminder.


Boil disinfection and sterilization can easily lead to the deterioration of handicrafts. If you want to carry out boiling disinfection and sterilization, please reduce the time at least to a certain extent and prevent long-term boiling.


When bleaching, try to use oxygen-based bleaching liquid, and avoid using chlorine-based bleaching liquid. If chlorine-based bleach is used, the kitchen utensils will be dull, the door handles will fall, and the food utensils themselves will turn yellow. And warmly remind the amount of bleach solution, and sufficient tap water to wash.


3. Application: In non-dry conditions (water droplets on the kitchen utensils or sufficient moisture in the ingredients), it can be used as a microwave heating and ozone disinfection cabinet. However, this product is not a special kitchen utensil for microwave heating, and it is recommended not to be used for microwave heating for a long time to prevent the service life from being shortened.


4. Clean up


Please use a thin cloth to clean, do not use abrasive powder and soft brush to prevent scarring.


Please rinse with water immediately after cleaning and bleach. It is recommended to soak with oxygen-based bleaching solution once a week for 20 minutes each time.



Do not use chlorine-containing bleach, as this may cause material deterioration or discoloration.


Long-term pre-soaking at high temperature will damage the surface (fancy, etc.). If you want to pre-soak, soak it in warm water at 30-40°C for about 15-20 minutes.

photobank

Send Inquiry