one. Preheating procedure: Use the raw material box to weigh the tableware that needs to be produced, weigh it and put it into the high-frequency wave to evenly preheat, so that the powdered raw material is heated into a block (solidification but not scattered).
two. Raw noodle program: pour the preheated agglomerated raw materials into the mold, start the mechanical raw noodle program, and undergo high temperature and high pressure, solidification and molding (compression molding machine is commonly used for compression molding).
three. Applique procedure: Cut the decal paper that has been brushed with the gloss powder according to the shape of the flower, and paste it on the plain-formed tableware as required. The decal should be pasted upright, the decal position is moderate, and it is beautiful and generous, and the flower is applied to start the mechanical printing. Procedure, printing requires a compression molding machine to perform a second compression molding to print the decal paper on the tableware.
Four. Adding gold procedure: After the product has been applied, evenly sprinkle the light powder on the surface of the product. The light powder should not be sprinkled less, otherwise it will affect the color of the product. Of course, you should not sprinkle too much. Then start the machine, after the machine is cured under high temperature and pressure, the surface of the product has the brightness of porcelain.
five. Polishing procedure: After the product is produced, it must be polished and polished. Because the produced product has burrs, which is not conducive to the use of people's lives, it is easy to cause damage to people's hands and mouths; therefore, polishing and polishing are indispensable. Polishing can remove the burrs of the product, making the product look more beautiful and smoother.
six. Inspection and packaging procedures: the polishing operation enters the inspection link, and the quality inspection is strictly controlled. There should be initial inspection and re-inspection to pick out the unqualified products, and then enter the warehouse for packaging
